Open-E Knowledgebase

Open-E storage cannot pass Windows cluster Validation test

Article ID: 1133
Last updated: 06 Apr, 2011

Symptom:

Open-E storage cannot pass Windows cluster Validation test

Problem:

Errors when validating that storage supports the SCSI-3 Persistent Reservation commands

The following errors appear on initiator site (Windows 2008 R2):

Validating Cluster Disk 0 for Persistent Reservation support

Registering PR key for cluster disk 0 from node sm-comm.mesmetlab.int

Failed to Register PR key for cluster disk 0 from node xx-xxxx.xxxxxxx.xx status 1

Cluster Disk 0 does not support Persistent Reservations.

Solution:

You need to switch the IETD iSCSI to SCST iSCSI. IETD does not support iSCSI 3 commands.

In order to do that, go to DSS console -> CTRL+ALT+W -> Tuning options -> iSCSI deamon options -> iSCSI solution and choose SCST iSCSI.


Open-E software impacted:  DSS V6

Example ticket number: 1020172

This article was:   Helpful | Not helpful Report an issue


Article ID: 1133
Last updated: 06 Apr, 2011
Revision: 1
Views: 2711
Posted: 06 Apr, 2011 by --
Updated: 06 Apr, 2011 by
print  Print email  Subscribe email  Email to friend share  Share pool  Add to pool
Also listed in
folder Information -> General info -> iSCSI

Prev     Next
How can we improve high latency links using MaxOutstandingR2T...       After update to DSS V6 build 4786 or to build 5087 with a Xen...

The Knowledge base is managed by Open-E data storage software company.