Open-E Knowledgebase
Knowledgebase
Downloads
Tags
Ask a Question
Open-E Website
Open-E Instagram Profile!
Follow us!
Like us!
toggle
Open-E / KB Home / Troubleshooting / Hardware / Hardware RAID problems / Installing the LSI MegaRAID Storage Manager with "Client"...

Installing the LSI MegaRAID Storage Manager with "Client" or "Full" option.

Article ID: 2681
Last updated: 16 Jul, 2015

Symptom:

When installing with the Client option you are not able to set Alarms edit and settings.

Problem:

Issue is with the LSI MegaRAID Storage Manager

Solution:

If you install the MegaRAID Storage Manager with the option "FULL", there will be no problem with the Alarms edit and settings.

If you install the MegaRAID Storage Manager with the option "Client" then you will not be able to set the Alarms edit and settings.

Additional information:

Open-E software impacted:

Example ticket number:

This article was:   Helpful | Not helpful Report an issue


Article ID: 2681
Last updated: 16 Jul, 2015
Revision: 1
Views: 2316
Posted: 08 Jul, 2015 by Maxwell T.
Updated: 16 Jul, 2015 by Kula T.
print  Print email  Subscribe email  Email to friend share  Share pool  Add to pool
Prev     Next
Problem accessing the RAID controller via LSI MSM       VMware: Problems with DirectPath RAID Controller ( passthrough )

RSS
The Knowledge base is managed by Open-E data storage software company.