Open-E Knowledgebase
Network problems
After update to DSS 5.0up62 or DSS V6 I'm not able to access over from all subnetworks.
Symptom: After updating to DSS 5.0up62 or DSS V6 there be found problems with accessing the GUI and SMB from all subnetwors. Problem: In earlier version the DSS was having a internal routing that was able to route information between NICs. The problem is that in case...
rating 11 Aug, 2009 Views: 2228
How can I rename the Ethernets after the update?
Problem: After updating my system, the Ethernets name get changed, how can I rename them? Solution: The NICs can be reset by disabling them in the BIOS, but Open-E remembered them when the server turned back on.  And you can reset them from the extended console (C-A-X) and selected...
rating 29 Jul, 2009 Views: 2781
Why I do have a slow writing process when I run snapshots?
Symptom: I am using NAS replication and I am getting very slow write performance.  My RAID is set to cache enabled. Problem: Normal 0 false false false EN-US X-NONE X-NONE ...
rating 18 Feb, 2009 Views: 3051
Modify Ethernet Card driver
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Tuning your Ethernet card In some...
rating 18 Feb, 2009 Views: 4319
"jiffie" & "WATCHDOG" errors
Symptom: Some data are not send to the iSCSI initiator.   Problem: Network has problems while sending packets [..] "jiffies <dd2739> next_to_watch.status <0> e1000: eth0: e1000_clean_tx_irq: Detected Tx Unit Hang Tx Queue <0> TDH <a5> TDT <df> next_to_use...
rating 10 Feb, 2009 Views: 2420

Prev Next →
1 2

The Knowledge base is managed by Open-E data storage software company.