Open-E Knowledgebase

Modify Ethernet Card driver

Article ID: 116
Last updated: 18 Feb, 2009

Tuning your Ethernet card

In some instances you may need to disable or change certain features on your Ethernet controller for better performance.

From the console


Select Modify Driver Option

Select the Ethernet card you want to modify

Please refer to your Ethernet controller manual for the changes needed

The following link is for Intel NIC cards

Select the changes that you want to modify and use the manual for the changes needed.


To set auto-negotiate to FULL we would change

AutoNeg = 0x020

This article was:   Helpful | Not helpful Report an issue

Article ID: 116
Last updated: 18 Feb, 2009
Revision: 1
Views: 4319
Posted: 02 Feb, 2009 by --
Updated: 18 Feb, 2009 by
print  Print email  Subscribe email  Email to friend share  Share pool  Add to pool
Also listed in
folder Information -> General info -> Performance

Prev     Next
Why I do have a slow writing process when I run snapshots?       "jiffie" & "WATCHDOG" errors

The Knowledge base is managed by Open-E data storage software company.