Open-E Knowledgebase

S.M.A.R.T. Message ioctl32(smartctl:19152)

Article ID: 124
Last updated: 24 Feb, 2009

Symptom:

I am receiving these messages

ioctl32(smartctl:19152): Unknown cmd fd(3) cmd(0000030d){t:03

Solution:

S.M.A.R.T. may be enabled in the console or on your RAID controller

Check the console CTRL-ALT-W -> Functionality option to see if S.M.A.R.T

has been enabled, if so please disable it.

Check the RAID controller BIOS to see if S.M.A.R.T has been enabled there as well.


Some of the newer RAID controllers have the S.M.A.R.T function built in.

Additional information:

If S.M.A.R.T. is not enabled than please download and install small update 0335-dss_b.upd

Open-E software impacted:

Example ticket number:

This article was:   Helpful | Not helpful Report an issue


Article ID: 124
Last updated: 24 Feb, 2009
Revision: 1
Views: 2875
Posted: 04 Feb, 2009 by --
Updated: 24 Feb, 2009 by
print  Print email  Subscribe email  Email to friend share  Share pool  Add to pool
Attached files
item 0335-dss_b_090224062305.upd (19 kb) Download

Also listed in
folder Troubleshooting -> Software -> Updates

Prev     Next
Snapshot       I've lost my ACL configuration after installing an update.

The Knowledge base is managed by Open-E data storage software company.