Open-E Knowledgebase

Problem Loading the DSS V6 with some Motherboards

Article ID: 1143
Last updated: 11 Apr, 2011

In case you are having issues with booting fully with the DSS V6 due to some newer motherboards please try the following.

Select (highlight) the “run software installer” and THEN press TAB key.
Then modify following boot parameters:
vmlinuz3 change to--> vmlinuz4
initrd3.gz change to--> initrd4.gz
xarch32 change to--> xarch64

In order to properly boot with USB2 please remove the “nousb2” then press the Enter key to start the DSS V6.

This article was:   Helpful | Not helpful Report an issue


Article ID: 1143
Last updated: 11 Apr, 2011
Revision: 1
Views: 2193
Posted: 11 Apr, 2011 by Rafinski G.
Updated: 11 Apr, 2011 by Rafinski G.
print  Print email  Subscribe email  Email to friend share  Share pool  Add to pool
Prev     Next
USB 1.1 mode, and compatibility with some Intel motherboards       Why the system keep hanging when using SuperMicro PDSME+...

The Knowledge base is managed by Open-E data storage software company.