Open-E Knowledgebase
Knowledgebase
Downloads
Tags
Ask a Question
Open-E Website
Open-E Instagram Profile!
Follow us!
Like us!
toggle
Open-E / KB Home / Troubleshooting / Software / Backup problems / Configuring DSS V6/V7 to work with NUT, using UPS network card

Configuring DSS V6/V7 to work with NUT, using UPS network card

Article ID: 1203
Last updated: 25 Jun, 2013

To enable NUT,  choose MGE as UPS vendor and UM-Link (SNMP) as UPS model.

Setup->Hardware Settings

V6:

V7:

This article was:   Helpful | Not helpful Report an issue


Article ID: 1203
Last updated: 25 Jun, 2013
Revision: 1
Views: 4387
Posted: 04 May, 2011 by Rafinski G.
Updated: 25 Jun, 2013 by Dydak M.
print  Print email  Subscribe email  Email to friend share  Share pool  Add to pool
Prev     Next
Backup problems       Creating Disk Array with DSS V7

RSS
The Knowledge base is managed by Open-E data storage software company.