Open-E Knowledgebase

Adaptec/Microsemi Storage Manager (ASM) access in DSS V7 up60

Article ID: 1573
Last updated: 18 Jan, 2018

1 - Adaptec/Microsemi controllers maxView Storage Manager v2.03.22476 is required.

2 - Change the default password for the Adaptec Storage Manager to gain read/write access. To do this, Login to the DSS V7 webGUI, and navigate to SETUP -> H/W Raid -> Adaptec administration. If you do not do this, read-only access is all that will be available.

Default Login accounts:

Read-Only access-
Username: raid
Password: raid

Read-Write access-
Username: aac
Password: <<set from DSS V7 webGUI>>

This article was:   Helpful | Not helpful Report an issue

Article ID: 1573
Last updated: 18 Jan, 2018
Revision: 1
Views: 5773
Posted: 07 Mar, 2012 by --
Updated: 18 Jan, 2018 by Kula T.
print  Print email  Subscribe email  Email to friend share  Share pool  Add to pool
Also listed in
folder Troubleshooting -> Hardware -> Hardware RAID problems

Prev     Next
[DSSV7][JDSS] Unable to connect to HW RAID using Megaraid...       LSI MIB to collect all information. To use with LSI RAID...

The Knowledge base is managed by Open-E data storage software company.