Open-E Knowledgebase

USB 1.1 mode, and compatibility with some Intel motherboards

Article ID: 1243
Last updated: 09 May, 2011

In case you have a mother board that will not install with DSS V6:
The workaround is to remove "nousb2" from boot loader command line (by pressing TAB on the "Run Software Installer" entry, editing the line by removing "nousb2" and after complete just press "Enter").

NOTE: this has been removed from the boot loader in the latest version of DSSV6: dss6.0up75_b5377

This article was:   Helpful | Not helpful Report an issue


Article ID: 1243
Last updated: 09 May, 2011
Revision: 1
Views: 2480
Posted: 09 May, 2011 by Rafinski G.
Updated: 09 May, 2011 by Rafinski G.
print  Print email  Subscribe email  Email to friend share  Share pool  Add to pool
Prev     Next
How to check the PCI ID?       Licensing issues with Supermicro motherboards

The Knowledge base is managed by Open-E data storage software company.