Open-E Knowledgebase
Miscellaneous
How to Configure Socomec (NET VISION) UPS via Ethernet SMART CARD (www.socomec.ch)
1.      1. Find out the UPS IP address from the DHCP server. (in this how-to : 192.168.0.156) 2.      2. Go to the UPS WEB GUI http:// 192.168.0.156 address: default user name: admin  password: public 3.      3. In the...
rating 08 Mar, 2017 Views: 2487
How to fix the issue with non-detected Intel X540-0 AT2 10 Gigabit Ethernet Controller
NOTE: This solution is for DSS V7 system This issue was observed on some Supermicro motherboards: NIC is not visible in DSS for configuration, but the driver is loaded and card information can be seen. To fix it, enter BIOS > "Advanced Chipset Configuration" > "Enable VT-d" and change...
rating 10 Aug, 2016 Views: 1001
High CPU usage after update to DSS V7 up53
Problem: - high cpu usage after update to the DSS V7 up53, - multicore CPU visible as one core CPU in the log file: tests.log Solution: - turning off X2APIC settings in the mainboard BIOS, X2APIC is not supported by DSS kernel Problem occured on HP GEN9 server but it is...
rating 18 Nov, 2015 Views: 2601
After updating Firefox to latest version (V34 or higher), access the the DSS webGUI is blocked.
The problem is that the Firefox upgrade v34 and higher is disabling SSL v3. Current DSS V7 versions does not have this problem as default Security protocol is set to “Automatic” (SSL v3 + TLS), but some older DSS versions or updated from older may have this problem. To fix the problem with...
rating 27 Jan, 2015 Views: 3006
Infiniband setup with VMware and DSS V7
We want to thank the PAConnect Team for the hard work on putting this together and contributing this for everyone to use as a guide. Written and developed by: Kenneth Lindsay & Jessy Marker MCSE,MCTS,ACE www.paconnect.com Infiniband for VMWare   * Download PuTTY and WinSCP,...
rating 24 Jun, 2014 Views: 3266
Is Mellanox MCX312A-XCBT 10GbE supported in DSS V7
 Yes, but you need to apply the small update. It suits to DSS V7 up00 and up01. In later versions the driver will be included.
rating 28 Mar, 2013 Views: 2013
Upgrading from DSSv6 Lite to DSSv6 Full
You can upgrade your DSSv6 Lite build to be a Full DSSv6 by typing the PK (Product Key) for DSSv6 Full version, into the Lite DSSv6, and the system should work as DSSv6 Full version after reboot . To upgrade your license key from DSSv6 Lite to a Full DSSv6, please visit the following link : ...
rating 19 Mar, 2012 Views: 4244
Licensing issues with Supermicro motherboards
If you are facing licensing issues with DSS V6 that runs on the following Supermicro motherboards: X8DT3/I X8DT6/E X8DTT X8DTN+ please update the BIOS to the newest version or at least to the one that can be found in the attachment (X8DT60.zip). DSS V6 uses motherboard ID’s to...
rating 13 Oct, 2011 Views: 2318
USB 1.1 mode, and compatibility with some Intel motherboards
In case you have a mother board that will not install with DSS V6: The workaround is to remove "nousb2" from boot loader command line (by pressing TAB on the "Run Software Installer" entry, editing the line by removing "nousb2" and after complete just press "Enter"). NOTE: this has been removed...
rating 09 May, 2011 Views: 2480
Problem Loading the DSS V6 with some Motherboards
In case you are having issues with booting fully with the DSS V6 due to some newer motherboards please try the following. Select (highlight) the “run software installer” and THEN press TAB key. Then modify following boot parameters: vmlinuz3 change to> vmlinuz4 initrd3.gz change...
rating 11 Apr, 2011 Views: 2193

← Prev Next
1 2

The Knowledge base is managed by Open-E data storage software company.