Open-E Knowledgebase
Search:     Advanced search
Showing: 1-10 of 17    »»
Articles
 
document How does Volume Replication work?
Volume replication is very similar to RAID 1. The first stage involves rebuilding the destination as a copy of the source volume.  The next stage is a continuous online modification of the destination volume to preserve the mirror copy. The difference between this process...
rating 22 Oct, 2008 Views: 5026
document Upgrading from DSSv6 Lite to DSSv6 Full
You can upgrade your DSSv6 Lite build to be a Full DSSv6 by typing the PK (Product Key) for DSSv6 Full version, into the Lite DSSv6, and the system should work as DSSv6 Full version after reboot . To upgrade your license key from DSSv6 Lite to a Full DSSv6, please visit the following link : ...
rating 19 Mar, 2012 Views: 4057
document Antivirus:Alert: Found viruses
Symptom: The Clamev Virus scanner sends the following message: "Antivirus:Alert: Found viruses! For more details check out the logs" Problem: Normal 0 false false false EN-US X-NONE X-NONE ...
Not rated 09 Feb, 2009 Views: 2640
document Antivirus
Antivirus, you can enable the Antivirus option under Configuration -> NAS settings While there, you are able to select a share to send infected files to, with the option "Use quarantine" Under  "maintenance -> antivirus" you can select single shares or enable the...
Not rated 23 Feb, 2009 Views: 2533
document "System Corrupted No USB flash module has been found" or "No operating system found"
Symptom: Monitor prompt a "System Corrupted No USB flash module has been found" error message. Problem: Module is unable to boot from BIOS Solution: Try disabling  USB 2.0 on the motherboard  BIOS. Some motherboards will have the option to select USB 2.0 or USB...
Not rated 31 Mar, 2009 Views: 8743
document Language options
The Open-E GUI can support different languages, they are as follows English, Deutsch, Russian and Japanese. The languages can be changes from either the console with CTRL-ALT-T and then language settings or from the GUI at SETUP -> GUI and then selecting the lauguage.
rating 24 Feb, 2009 Views: 2336
document Why the system keep hanging when using SuperMicro PDSME+ motherboard?
...
Not rated 29 Jul, 2009 Views: 4111
document Problem Loading the DSS V6 with some Motherboards
In case you are having issues with booting fully with the DSS V6 due to some newer motherboards please try the following. Select (highlight) the “run software installer” and THEN press TAB key. Then modify following boot parameters: vmlinuz3 cha nge to> vmlinuz4 initrd3. gz...
rating 11 Apr, 2011 Views: 1996
document How to check the PCI ID?
What is a PCI ID? It is the Vendor ID and Device ID registers to identify the device, and are commonly called the PCI ID. There are some situations when a PCI ID of the installed hardware is needed to check if the DSS V6 built in drivers supports the hardware. In order to check the...
Not rated 09 May, 2011 Views: 3975
document USB 1.1 mode, and compatibility with some Intel motherboards
In case you have a mother board that will not install with DSS V6: The workaround is to remove "nousb2" from boot loader command line (by pressing TAB on the "Run Software Installer" entry, editing the line by removing "nousb2" and after complete just press "Enter"). NOTE: this has been removed...
rating 09 May, 2011 Views: 2277
The Knowledge base is managed by Open-E data storage software company.
RSS