Open-E Knowledgebase
Knowledgebase
Downloads
Tags
Ask a Question
Open-E Website
Open-E Instagram Profile!
Follow us!
Like us!
toggle
Open-E / KB Home / Information / General info / Virtualization / Issue with long booting of VMware ESX 5.0 connected to iSCSI targets

Issue with long booting of VMware ESX 5.0 connected to iSCSI targets

Article ID: 1453
Last updated: 21 Oct, 2011

 If you experience a really long booting process of your VMware ESX 5.0 servers that are connected to the DSS V6 iSCSI targets, try to remove the VMKernel Port Bindings - see the images below.
Please also make sure that in the iSCSI initiator properties you use is set to Static Discovery. There should be no iSCSI server locations present in the Dynamic Discovery tab.
This article was:   Helpful | Not helpful Report an issue


Article ID: 1453
Last updated: 21 Oct, 2011
Revision: 1
Views: 2215
Posted: 21 Oct, 2011 by --
Updated: 21 Oct, 2011 by
print  Print email  Subscribe email  Email to friend share  Share pool  Add to pool
Also listed in
folder Troubleshooting -> Software -> iSCSI problems

Prev     Next
Virtualization       XenServer 5.5 with iSCSI Storage on Open-E DSS / Chelsio 10G...

RSS
The Knowledge base is managed by Open-E data storage software company.