Open-E Knowledgebase
Sub Categories
folder MPIO
How-To's and Questions related to MPIO for use with iSCSI data transfer


iSCSI
[DSS V7][JovianDSS] I have a low NFS performance in VMware environment.
Additional information: product name: JovianDSS / DSS V7 product version: all build: all Problem: "I have a low NFS performance in VMware environment." Customer reports that NFS performance results for NFS 16K writes are ~11 MB/sec. Symptoms: Tests conducted with DSS and IOMeter:...
rating 24 May, 2021 Views: 13359
[DSS V7]Setup Linux (Debian / Ubuntu) box with iSCSI and MPIO to connect to an iSCSI Tartget
Additional information: product name: DSS V7 product version: all versions build: all builds Subject: Setup Linux (Debian / Ubuntu) box with iSCSI and MPIO to connect to an iSCSI Tartget in DSS V7 Contents: Install and configure Linux box with 3 NICs Run below commands in...
rating 21 Apr, 2021 Views: 16219
[DSS V7] iSCSI target tuning settings in DSS V7
Additional information: product name: DSS V7 product version: pre and post up57 build: all Subject: iSCSI target tuning settings in DSS V7 Contents: Suggested values for iSCSI target tuning settings. DSS V7 in versions preceding up57 come with the following iSCSI target configuration...
rating 22 Apr, 2020 Views: 0
[JDSS][DSS V7] How can I connect to a iSCSI target from Linux console?
Additional information: product name: JovianDSS / DSSv7 product version: all build: all Subject: In this article, we look into connecting to a remote iSCSI target. Contents: Installing open-iSCSI / iSCSI-initiator-utils Debian based distributions: sudo apt-get install...
rating 09 Apr, 2020 Views: 0
[DSS V6][DSS V7] How to connect to iSCSI target using Solaris 10?
Additional information: product name: DSS V6 / DSS V7 product version: all build: all Problem: Cannot connect to the iSCSI target using Solaris 10. The customer was able to connect to my iSCSI target using Solaris 8 which had Cisco iSCSI initiator compatibility. In Solaris 10 he has to...
rating 09 Apr, 2020 Views: 11923
[DSS V7][JDSS] File I/O or Block I/O?
Additional information: product name: JovianDSS / DSS V7 product version: all build: all Subject: I am unsure of which option to select when creating and attaching an ISCSI target to a Zvol in JovianDSS or creating a new ISCSI volume in DSS. Contents: At the most basic level; with...
rating 08 Apr, 2020 Views: 24560

The Knowledge base is managed by Open-E data storage software company.