Open-E Knowledgebase
Knowledgebase
Downloads
Tags
Ask a Question
Open-E Website
Open-E Instagram Profile!
Follow us!
Like us!
toggle
Open-E / KB Home / Troubleshooting / DSS V7 Default Gateway

DSS V7 Default Gateway

Article ID: 2343
Last updated: 29 Mar, 2013
This function allows you to set a default gateway for the storage system. Only one 
default gateway can be set up at any given time.
NOTE The default gateway will become inactive if any of the following conditions are met:
  •  the interface with the default gateway has become part of a bonding interface,
  •  the interface with the default gateway has been removed or deactivated (concerns both physical and bonding interfaces).
NOTE It is possible to set the default gateway on an inactive interface. In such a case, the gateway will 
remain inactive until that interface is activated.
NOTE If the interface you are setting the default gateway on does not have any gateway defined (i.e. the 
Gateway field says Undefined), you will need to define a gateway first (under the t
This article was:   Helpful | Not helpful Report an issue


Article ID: 2343
Last updated: 29 Mar, 2013
Revision: 1
Views: 1379
Posted: 29 Mar, 2013 by --
Updated: 29 Mar, 2013 by
print  Print email  Subscribe email  Email to friend share  Share pool  Add to pool
Prev     Next
DSS V7 How to create bonding       DSS V7 Email notification

RSS
The Knowledge base is managed by Open-E data storage software company.