Open-E Knowledgebase

Configuration settings

Article ID: 151
Last updated: 24 Feb, 2009

Symptom: My DOM failed and I am booting from the Demo CD , I cannot see my users and groups

Problem: The Demo CD needs to know what the configuration settings are

Solution: Go to maintenance -> Miscellanous -> Restore settings

check setups and configuration from the latest file that you have then click on the green check mark to load the configurations ans settings.

The system will perform an autosave of the setup and configuration settings when there  is a power cycle.

It is reccomended that you save your settings after changes are made to the system.

Additional information:

Open-E software impacted:

Example ticket number:

This article was:   Helpful | Not helpful Report an issue


Article ID: 151
Last updated: 24 Feb, 2009
Revision: 1
Views: 4358
Posted: 24 Feb, 2009 by --
Updated: 24 Feb, 2009 by
print  Print email  Subscribe email  Email to friend share  Share pool  Add to pool
Also listed in
folder Information -> General info -> Miscellaneous

Prev     Next
How can I use Backup Exec 12.5 with my DSS V5?       Backup and restoring from different DOM and Demo CD

The Knowledge base is managed by Open-E data storage software company.