Open-E Knowledgebase
Sub Categories
folder Software
Troubleshooting software issues.
folder Hardware
Troubleshooting hardware issues.


Troubleshooting
DSS V7 Fibre Channel Configuration
In order to assign traffic from a FC initiator over your wanted FC port on the target side,  please:   1. In menu: CONFIGURATION-> FC target manager -> WWN Aliases, create an alias for  every FC Initiator WWN. If the FC Initiator show 2 WWN number starting with ...
rating 29 Mar, 2013 Views: 1282
DSS V7 How to create new CHAP user
To create a CHAP user enter name, password, retype password and press the create  button.  NOTE CHAP user name cannot:  contain characters: ~ ! @ # $ ^ & ( ) + [ ] { } * ; : ' " ., % | < > ? / \ = `,  begin or end with a space.  Password...
rating 29 Mar, 2013 Views: 1016
DSS V7 Quota (limit) option - user
The Qouta function allow you to specify  the amount of space a user is allowed to allocate  on the shares to which they have access. To remove any limitations for a user, you need to set their quota to 0.  NOTE Max quota value per user/group is 2TB. All greater values will be...
rating 29 Mar, 2013 Views: 1019
DSS V7 Quota for member of the group
You can assign a quota (limit) on the amount of space the members of a group are  allowed to allocate on the shares to which they have access. You can also make the  quota relevant only to those users for whom the given group is the primary, or only  for those users who do not have...
rating 29 Mar, 2013 Views: 995
DSS V7 Email notification
The server can send an e-mail notification to the administrator in case of any significant  events, critical errors, warnings, etc. To enable this feature check the Send errors box.  E-mail  E-mail address from which notifications will be sent. Account name  Account name for...
rating 29 Mar, 2013 Views: 1562
DSS V7 Default Gateway
This function allows you to set a default gateway for the storage system. Only one  default gateway can be set up at any given time. NOTE The default gateway will become inactive if any of the following conditions are met:  the interface with the default gateway has become part of a...
rating 29 Mar, 2013 Views: 1379
DSS V7 How to create bonding
 In order to create a bonding interface: select the network interfaces you want to create a new bonding interface for,  select the preferred bonding mode from the Create drop-down menu,  select dynamic (DHCP) or static configuration for the network interface,  if...
rating 29 Mar, 2013 Views: 2203
DSS V7 Time zone settings
This function allows you to adjust NTP server settings. Please select an NTP server (Network Time Protocol: for more info please see:  www.ntp.org). You may provide a fully qualified host name or an IP address. Next, select the time  zone suitable for your location. With the Continuous...
rating 29 Mar, 2013 Views: 1600
DSS V7 Server name
This name is used primarily for NAS protocols, which makes it different from the hostname, which is  primarily used internally (for failover and volume replication functions). Server name and comment rules:  please make sure the server name is unique in your network, ...
rating 05 Apr, 2013 Views: 1141
DSS V7 Host name
Hostname is one of the names used to identify this machine. It is primarily used for  internal processes (most importantly, Failover and Volume replication). It is different  from the server name; usually server name is primarily used for NAS protocols. Hostname needs to start with a...
rating 05 Apr, 2013 Views: 1294

Prev Next
1 2 3 4

The Knowledge base is managed by Open-E data storage software company.