Additional information:
- product name: DSS V6 / DSS V7
- product version: all
- build: all
Problem:
Cannot connect to the iSCSI target using Solaris 10.
The customer was able to connect to my iSCSI target using Solaris 8 which had Cisco iSCSI initiator compatibility.
In Solaris 10 he has to use the built-in initiator and that's where he has the issue.
Symptoms:
Cannot connect to the iSCSI target using Solaris 10.
Solution:
While creating target change untick "Target Default Name" and set:
iqn.2009-07.com.open-e:<dss name>.<target alias> |
Following commands should be used to connect to iSCSI target:
iscsiadm add discovery-address 192.168.248.213:3260 |
iscsiadm modify discovery --sendtargets enable |
then commend "format" should be used to format iSCSI target.