Open-E Knowledgebase
Search:     Advanced search

How to setup gateway for Virtual IP (VIP) ?

Article ID: 912
Last updated: 22 Dec, 2009
Views: 2166
Posted: 22 Dec, 2009
by:
Updated: 22 Dec, 2009
by:

Unfortunately DSS V6 doesn't give functionality to setup gateway for Virtual IP (VIP). To overide that you can setup static routing table in network setup on console tools. To do this please:

1. Go to console and push ALT+CTRL+N,

2. Choose "Routing" from the "Network settings" list,

3. Choose "Add new routing" from additional routing table list,

4. Enter subnetwork address from with you want to access the VIP IP and bit mask (for example 200.100.1.0/24).

5. In next step please enter the router / gateway IP over with the transfer should go - (for example if VIP IP is 192.168.1.2 and router IP could be 192.168.1.1),

6. Apply this routing settings and exit the network settings menu,

7. Please enter console tools (ALT+CTRL+T) and check the settings using PING function.

This article was:   Excellent | Very Good | Good | Fair | Poor
Prev   Next
General info     Can't access my shares when NFS Failover is on.

RSS