Open-E Knowledgebase

How to recreate volume replication meta-data

Article ID: 972
Last updated: 06 Jul, 2010

Problem:

 I had modified my tasks and now would like to recreate the volume replication meta-data task. How this can be accomplished?

Solution:

In order to recreate the Volume Replication meta-data, access the GUI in the CONFIGURATION -> Volume Manager -> Vol. Replication -> Replication task manager and delete the replication task.

Then access the Volume Manager function  (CONFIGURATION -> volume manager -> Vol. groups -> vg00 ) and locate the ACTION pull-down menu then select: modify lvxxxx (where xxxx is your volume you will be removing the vol.replicaton meta-data.) then un-check the “Use volume replication” box and click on Apply.
This will now remove the Volume Replication meta-data.This operation will NOT change the user data or modify it at all.
Now, in order to create new meta-date, repeat the same procedures and make sure to check the “Use volume replication box” before clicking on the Apply button.
Perform this on both primary and secondary servers and then create the Volume Replication tasks on the primary server.
This article was:   Helpful | Not helpful Report an issue


Article ID: 972
Last updated: 06 Jul, 2010
Revision: 1
Views: 3805
Posted: 06 Jul, 2010 by --
Updated: 06 Jul, 2010 by
print  Print email  Subscribe email  Email to friend share  Share pool  Add to pool
Also listed in
folder Information -> General info -> iSCSI

Prev     Next
Hardware failure, RAID rebuilds, and Data/Volume Replication       Description of Connections Status in relation to Replications

The Knowledge base is managed by Open-E data storage software company.