Open-E Knowledgebase
Search:     Advanced search

Adaptec/Microsemi Storage Manager (ASM) access in DSS V7 up60

Article ID: 1573
Last updated: 18 Jan, 2018
Views: 5823
Posted: 07 Mar, 2012
by:
Updated: 18 Jan, 2018
by: Kula T.

1 - Adaptec/Microsemi controllers maxView Storage Manager v2.03.22476 is required.

2 - Change the default password for the Adaptec Storage Manager to gain read/write access. To do this, Login to the DSS V7 webGUI, and navigate to SETUP -> H/W Raid -> Adaptec administration. If you do not do this, read-only access is all that will be available.

Default Login accounts:

Read-Only access-
Username: raid
Password: raid

Read-Write access-
Username: aac
Password: <<set from DSS V7 webGUI>>

This article was:   Excellent | Very Good | Good | Fair | Poor
Also listed in
folder Troubleshooting -> Hardware -> Hardware RAID problems

Prev   Next
Problem in accessing 3dm RAID Management Utility     Configuring LSI RAID Controller alerts sent to DSS V7

The Knowledge base is managed by Open-E data storage software company.
RSS