[JDSS] configuring NVMe-oF initiator

Connecting external NVMe devices using NVMe-oF initiator

NVMe-oF initiator feature allows to connect NVMe devices from external enclosures, like JBOFs.

Configuration

To configure the NVMe-oF initator feature, go to the Storage Settings section and enter the NVMe-oF Initiator tab:

Press the "Discover" button to enter the NVMe-oF Initiator configuration wizard. Parameters needed to configure the connection are as follows

If all the parameters provided are correct a list of available subsystems is displayed. You can choose all subsystems or only a selected subset. Once ready click the "Connect" button. If CHAP user access is enabled for a subsystem enter credentials to connect.

If the connection is successful, a list of connected subsystems is presented under the NVMe-oF Subsystems section.

If a subsystem is to be removed from the system, click the option symbol under "Connection paths" and click "Remove paths":

Connected subsystems are also listed under the "Unassigned disks" section in the "Storage" section as connected NVMe devices. You can use them to create a storage Pool and provision storage:



Article ID: 3566
Last updated: 31 Jul, 2025
Revision: 1
JovianDSS -> JovianDSS Information -> General info -> NVMeoF -> [JDSS] configuring NVMe-oF initiator
/jdss-configuring-nvme-of-initiator_3566.html