Open-E Knowledgebase

[DSS V7] How to restore the default Volume Group

Article ID: 3231
Last updated: 16 Apr, 2021

Additional information:

  • product name: DSS V7
  • product version: all / version 
  • build: all / version 


This can be caused by a few different issues.

1) Adding new drives to expand your RAID Array

2) Adding new volume group

3) Recently ran filesysem repair

4) System rebooted from a power failure


ERROR: No system volume found! System services can't work without system
volume !


From the Console UI

1. CTRL + ALT + X

2. Choose "Select default volume group"

2a. If you have multiple volume groups, please be sure to select the correct volume group.

This article was:   Helpful | Not helpful Report an issue

Article ID: 3231
Last updated: 16 Apr, 2021
Revision: 1
Views: 0
Posted: 16 Apr, 2021 by Andrusiak D.
Updated: 16 Apr, 2021 by Rybak M.
print  Print email  Subscribe email  Email to friend share  Share pool  Add to pool
dss v7 restore backup
Prev     Next
Backup/restore       Bonding/teaming

The Knowledge base is managed by Open-E data storage software company.