Open-E Knowledgebase

[JDSS] Best Practices & Procedure for Single-node Software Update

Article ID: 3341
Last updated: 13 Mar, 2023

Information:

•    product name: Open-E JovianDSS
 

Best Practices & Procedure for Single-node Software Update

To successfully complete the update process, the following steps are recommended:


1.  Save settings 
System Settings -> Settings management -> Save current settings


2.  Download settings 
System Settings -> Settings management -> Options -> Download


3.  Delete all auto-saved and manually saved settings
System Settings -> Settings management -> Options -> Delete

4.  Download logs
Diagnostics -> Logs-> Download all


5.  Delete Logs 
Diagnostics -> Logs-> Delete archived logs


6.  Check the installed small updates and check with the technical support if they are still required in the new software version.
System Settings -> Update -> All small updates are listed in the small updates section


Note: most of the small updates are incompatible with the new software version, if small updates are still required please contact the technical support in order to get new small updates re-compiled for the new software version.


7.  Upload new software ISO  (this is just upload, no reboot)

Please do not reboot now, but choose the option 'Change and reboot later'


System Settings -> Update -> Upload update -> Browse -> Select the new software version file -> open -> Upload -> Change and reboot later

Reboot should take place in step 9 


Note: The new software version must be listed with the suffix: (default to boot)


8.  Disable (‘Pause’) all replication tasks 
Backup & Recovery -> Options -> Disable task


9.  Reboot system

Click the ‘Arrow down’ button (next to the ‘Logout’ button) and select Reboot

Warning: Rebooting the system causes downtime

Warning: After the reboot, the notification to upgrade the filesystem can be displayed. Downgrade to the previous system version is not possible after the filesystem upgrade. Before you upgrade the file system,  make sure you completed all steps, and checked if the system works properly.

10. Once the node is up and running, enable all replication tasks
Backup & Recovery -> Options -> Enable task

11. After reboot is completed, re-enter all the Active Directory information


12. In case of any issues with settings after the system update, you can set them back using the settings-file downloaded in step no. 2. 


13. After the system version update, check the system to ensure it works properly. You can upgrade the filesystem now if required (watch the system notifications).

This article was:   Helpful | Not helpful Report an issue


Article ID: 3341
Last updated: 13 Mar, 2023
Revision: 3
Views: 0
Posted: 05 Aug, 2022 by Admin I.
Updated: 13 Mar, 2023 by Bocian F.
print  Print email  Subscribe email  Email to friend share  Share pool  Add to pool
Prev     Next
[JDSS] Best Practices & Procedure for Cluster Software Update       Boot Media

The Knowledge base is managed by Open-E data storage software company.