[JDSS] Broadcom SAS HBA controllers with SAS MPIO

Additional information:

Subject:

Broadcom SAS HBA controllers with SAS MPIO

Contents:

Broadcom (previously LSI) has a dedicated firmware for some of its SAS Host Bus Adapter controllers that might be required when external multi-path (MPIO) configurations are being implemented. It was created to increase the responsiveness of the topology during the event of a cable pull, IOM/ESM reset, or a drive pull. Broadcom recommends upgrading the controllers, otherwise, they might cause problems. In some cases, it’s necessary to update the backplane firmware as well.

Extended Broadcom information/list of specific HBA controllers:
Broadcom controller list

This firmware is suitable only for multi-path implementations.
 



Article ID: 3101
Last updated: 14 Apr, 2020
Revision: 2
JovianDSS -> JovianDSS Information -> General info -> iSCSI -> MPIO -> [JDSS] Broadcom SAS HBA controllers with SAS MPIO
https://kb.open-e.com/jdss-broadcom-sas-hba-controllers-with-sas-mpio_3101.html