[DSS V7] Default Volume Group

Additional information:

Problem:

Receiving following error message:

"ERROR: No system volume found! System services can't work without system volume!"
 

Symptoms:

This can be caused by a few different issues.

  1. Adding new drives to expand your RAID Array
  2. Adding new volume group
  3. Recently ran filesysem repair
  4. System rebooted from a power failure

Solution:

From CLI console:

Press:

CTRL-ALT-X > "Select default volume group"

If you have multiple volume groups, please be sure to select the correct volume group.

​​​​



Article ID: 136
Last updated: 24 May, 2021
Revision: 2
DSS V7 -> [DSS V7] Default Volume Group
https://kb.open-e.com/dss-v7-default-volume-group_136.html